More work on the Scad-A-Bout putting in a dog bowl sink that will be used to wash hands, silver ware, dishes, etc. Not for drinking water, but in an emergency you could because I plan on using clean drinking water for the supply.

I also replaced the hinges for the left door with some heavy duty chrome door hinges.

I also took some measurements on the inside window to make some curtains. I made the curtain rod holders for a 10mm wood rod , on my 3D printer (link here https://www.tinkercad.com/things/1kNPvbI5BZ5 ).

https://www.tinkercad.com/embed/1kNPvbI5BZ5?editbtn=1

I also got my back hatch locking, but will need to strengthen the screw holes with toothpicks and wood glue. I am also going to put a pad lock on the hatch to prevent a break in using a pry bar. This is only if we need to leave it in a camp site for the day while we take the truck into town or site seeing it won’t be so tempting to pop the back hatch and grab my teardrop chow and hooch!

This makes it so the rods then turning the handle guide the ends into the side wall metal holes. The are 3D printed plastic, so not to be relied on for major security.

I started the penny top counter after painting the surface black and then sealing the wood so the epoxy doesn’t drain out of a small hole somewhere.